Behringer euroPower EPX3000 Power Amps Review

Behringer EPX3000 Power Amp This professional 3000-Watt Lightweight Stereo Power Amplifier is equipped with what the company calls Accelerated Transient Response (ATR) Technology. What this means to the musician is the instantaneous production of peak transients with a great deal of punch and very little distortion. Inside the box, the ponderous weight of most power amplifiers comes from their monolithic toroid transformers and the massive banks of capacitors which are required for high-power operation. The Behringer EuroPower EPX3000 Power Amplifier circumvents much of this weight and gains an enviable power-to-weight ratio by using a switching-mode power supply and Class H circuitry.

The advantage of switching-mode power supplies is that they work on demand rather than continuously. This enables a degree of efficiency unrivaled in the industry. When an amplifier is more efficient it uses less power; the less power it consumes the less heat it generates; the less heat it generates the smaller (and lighter) the power supply needed to cool it. The switching-mode power supplies of the Behringer EuroPower EPX3000 Power Amplifier only ramps output power up when it is demanded, which is frequently thousands of times per second. Switching-mode power supplies are light and small, yet deliver all the power needed for performance.

The downside to high-efficiency designs has traditionally been an increase in distortion. The Behringer EuroPower EPX3000 Power Amplifier tackles this problem with technological innovation. By using a Class H amplifier in the circuitry, an engineering design featuring infinitely variable rail switching for modulating the power supply rails. To do this the design topology is capable of modulating the supply rails such that the rails themselves operate only a few volts higher than the output signal. Thus the output stage of the amplifier is able to continuously operate at its maximum efficiency.

Beyond the technological wizardry inside the box, the front panel design permits the musician to easily control these amplifiers and to monitor their operation at a glance. Power-On LEDs light up when the amp is switched on, and Gain Dials, as well as clipping indicator LEDs, let the musician monitor for signal distortion. Each channel is independently configured and the gain is individually selectable.

Everything about the design, construction and usability of the Behringer EuroPower EPX3000 Power Amplifier is purposeful. It’s apparent from the start they were developed with the needs of the professional musician in mind. Their weight saving design makes it easier to transport than conventional power amps, it produces sufficient power, has a built-in crossover and limiter, and it’s built to endure the travails of multiple setups during the grueling road schedule.

On the road, where weight of equipment really matters, and on the stage where clarity of sound is imperative, the choice of power amplifier by discriminating musicians is overwhelming the Behringer EuroPower EPX3000 Power Amplifier.

Behringer EuroPower EPX3000 Replacement Model

Behringer EuroPower Buying Options



Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Behringer EuroPower EPX" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

 

Pyle PZR50XA Power Amps Review

Pyle  PZR50XA Power Amp The PZR50XA is a power amplifier created with a feature set that is specifically designed to appeal to DJs, and from its easily transportable 29.7 pound weight to its whopping 5500 watts of earth-shaking power, the PZR50XA is destined to become one of the favorite power amps among performing and touring DJs. In addition to its rafter-rattling 5500 watts when bridged and driving a single speaker or subwoofer, the PZR50XA can produce up to 2750 watts per channel when operating in the standard dual channel mode and driving a pair of 8 ohm speakers. This is more than enough power for nearly any club, dance hall, or outdoor concert location. When it is time to pack the amplifier up and move on to the next venue, you will be extremely thankful for the fact that it weighs just 29.7 pounds.

To ensure that the PZR50XA would be compatible with most existing DJ equipment, Pyle included RCA inputs. XLR inputs are also available, and the speaker outputs are industry-standard banana plugs. For older turntables that must be grounded in order to prevent excessive hum, a grounding screw is provided. The unit also provides an auxiliary power jack for those performance situations where power outlets are at a premium.

Informative LEDs on the front of the unit serve to notify the user of any conditions that might cause concern. Each amplification channel has a clipping LED, which lights up when volume levels are too high and could cause damage to the speakers. The unit is cooled through a forced air induction system, by which hot air is quickly removed from the inside of the amplifier. The unit also features independent protective circuits, which are extremely useful for performance situations in which an amplifier problem simply can not be allowed to bring a concert to a halt. In some situations when only one amplification channel needs to be disabled, such as a single blocked cooling vent, the other channel will continue to operate as normal until the problem is corrected.

In its years of operation, Pyle Audio has quickly become one of the world's most popular suppliers of amplification equipment for cars and boats. The Pyle philosophy has always been to provide the highest amount of power for the least amount of money, and it is with this same mindset that Pyle PZR50XA Power Amplifiers have been developed.

Pyle PZR50XA Power Amplifiers - Summary:
• Produces a maximum of 5500 watts to a single bridged channel, or 2750 watts per channel in stereo mode
• Industry standard RCA and XLR inputs, and banana plug outputs
• Independent fault protection disables only the affected channel when fault conditions occur, which can save a performance
• Grounding screw helps to prevent some older turntables from generating excessive hum
• Auxiliary power jack enables a turntable or mixing board to be powered directly by the amplifier

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Pyle PZR50XA" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Pyle PZR6XA Power Amps Review

Pyle  PZR6XA Power Amp Pyle PZR6XA Power Amplifiers have been created with the performing DJ in mind, and DJs are sure to delight in the number of extremely useful features included especially for them. The PZR6XA is a dual channel power amplifier, capable of producing a maximum of 2200 watts to a single bridged channel, or up to 1100 watts per channel in standard stereo operation. At this amount of power, the PZR6XA can easily be bridged to drive a subwoofer, or used as a main amplifier and easily deliver enough sound to fill any club or dance hall.

Along with a mammoth amount of wattage, the PZR6XA delivers with an array of features that are certain to make DJs happy. The banana plug speaker outlets ensure that the unit will be compatible with most of the world's speakers, and the RCA and XLR inputs will work with nearly any mixing console or turntable. Additionally, for those DJs who use older turntables that must be grounded in order to avoid excessive hum, a grounding screw is provided. Another enormous benefit is the auxiliary power jack; for those parties or clubs that do not provide sufficient power outlets, the PZR6XA is able to power an additional piece of equipment directly from the back of the unit.

The PZR6XA is cooled through a forced air induction fan system. Clipping LEDs for each channel, located at the front of the unit, notify the user if the volume level is high enough to cause potential speaker damage and must be decreased. Additionally, the unit has an independent protective circuit for each channel. This is a feature not found in many power amplifiers at this price range; if a fault condition exists that causes only one channel's protective circuit to engage, such as a single blocked vent, the other channel will continue to operate as normal until the problem is resolved. This means that many types of equipment faults do not have to put a complete stop to a performance. In addition to overheating, the PZR6XA's protective circuitry also shuts down the affected channel in the event of a power spike, preventing internal damage from occurring.

Pyle Audio has invested many years into building brand recognition for its auto and marine audio equipment. Today, Pyle is well known as a company that provides amplification equipment with extremely high power at some of the lowest prices around, and they have now branched out into the world of professional audio with that same mindset.

Pyle PZR6XA Power Amplifiers - Summary:
• Provides a maximum of 2200 watts when bridged, or 1100 watts per channel in stereo mode
• Standard banana plug outputs and RCA/XLR inputs ensure that the unit will work with most available equipment
• Independent protective circuits for each channel
• Auxiliary power jack
• Grounding screw helps to avoid hum when the unit is used with older turntables

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Pyle PZR6XA" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Pyle PZR10XA Power Amps Review

Pyle  PZR10XA Power Amp Pyle PZR10XA Power Amplifiers are created especially with performing DJs in mind, and feature a maximum power output of 3300 watts in mono bridged mode, more than enough power to blow the roof off of any club or dance hall. In addition to its maximum of 3300 watts in bridged operation, the PZR10XA can produce up to 1650 watts per stereo speaker in standard dual channel mode. The unit weighs just 20 pounds, and is exceedingly easy to mount in a rack. It is especially useful for DJs who travel, thanks to the switching power supply that can be made to work with virtually any power outlet in the world. The unit also features an auxiliary power connection, allowing you to plug your mixing board or turntable directly into the back of the unit.

When purchasing a power amplifier, it is extremely beneficial to know that the amplifier will work with the other equipment that you already have. The PZR10XA features banana plug outputs, used by most of the world's speakers, and has standard RCA inputs along with the XLR inputs required by some more advanced equipment. For older turntables that can produce excessive hum when connected to an amplifier, a grounding screw is located at the rear of the unit.

The PZR10XA features the standard array of protective circuitry that would be expected of a professional power amplifier, including forced air fan cooling, clip warning indicators, and protection against power spikes. However, the unit features something additional that most amplifiers in its price range do not: independent protection circuits, one for each channel. Independent protection for each channel means that some types of problems do not have to bring a complete halt to your performance. If a problem effects one amplifier channel only, such as a single blocked air vent, that channel will shut down to prevent damage, while the other one will continue to operate as normal.

Although the name Pyle Audio is familiar mostly to fans of high-powered audio systems for cars and boats, that fact is very likely to begin changing as Pyle has quietly begun to make a name for itself in the professional audio industry as well. The secret is quickly coming out that Pyle Audio produces power amplifiers for bands, DJs, and installed sound applications with some of the most attractive watt per dollar ratios in the industry.

PZR10XA Power Amplifiers - Summary:
• Maximum of 3300 watts to one bridged speaker or 1650 watts per channel in stereo operation
• Independent protection circuits allow one channel to continue operating when the other is disengaged to protect itself
• RCA and XLR inputs, and banana plug outputs allow the unit to operate with most existing equipment
• Grounding screw for use with some older turntables
• Product created especially to appeal to performing DJs; light, and easy to transport from gig to gig

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Pyle PZR10XA" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Pyle PZR30XA Power Amps Review

Pyle  PZR30XA Power Amp Among aficionados of car and marine audio amplification systems, Pyle Audio is often one of the most mentioned companies. For years, Pyle has provided some of the most cost effective amplification solutions for cars and boats, and have recently begun creating professional audio equipment with this same mindset. Pyle Audio now produces power amplifiers for bands, DJs, installed sound applications, and home theater systems. Pyle PZR30XA Power Amplifiers are created especially for performing DJs, with a number of features that are sure to make them very happy.

The PZR30XA produces a maximum of 4400 watts to a single bridged amplification channel, or up to 2200 watts per channel in standard stereo operation. At this level of power, the PZR30XA will have no trouble driving a subwoofer, or providing your main speaker amplification for nearly any indoor or outdoor performance venue. The unit is certain to remain cool enough to last through any all-day concert set, thanks to its forced air fan cooling system.

The unit features independent protective circuits for each channel. This can be an enormous benefit during a performance, as some types of equipment failures will not shut the amplifier down completely. If a single amplifier channel overheats, for example, due to a blocked vent or improper installation, that channel will shut down to prevent damage. The other channel, however, will continue to operate as normal. In addition to overheating, the PZR30XA is also protected from a variety of electrical fault conditions, and a clipping LED for each channel serve to notify the user if either channel is being driven at volume levels that are too high.

Along with protection, the PZR30XA offers a high level of convenience, starting with the very thoughtful auxiliary power jack on the back of the unit, allowing your mixing console, turntable, or CD desk to be powered directly by the unit. Additionally, the banana plug outputs ensure compatibility with the majority of the world's speakers, and the RCA and XLR inputs ensure that the PZR30XA will be able to work with the equipment that you have already, and that an additional upgrade will not be necessary. Older turntables can also be used with the PZR30XA; a grounding screw on the unit's back panel ensures that excessive hum will be prevented.

Pyle PZR30XA Power Amplifiers - Summary:
• Produces a maximum of 4400 watts to a single bridged amplification channel, or 2200 watts per stereo speaker in dual channel operation
• Independent protective circuits ensure that the unit can continue operating with a single amplification channel under some fault conditions
• Industry standard banana plug outputs and unbalanced (RCA)/balanced (XLR) inputs
• Grounding screw ensures that older turntables will not generate excessive hum
• Forced air induction cooling system removes hot air efficiently from the unit
• Clipping LEDs for each channel notify the user if the volume level could cause speaker damage

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Pyle PZR30XA" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)