Pyle PT2001X Power Amplifiers are designed with features geared especially for performing DJs, and enough raw power to blow the roof off of any performance venue. The PT2001X is a dual channel power amplifier, featuring a maximum of 3300 watts available for bridged mono connections, or up to 1650 watts per channel when operated in the standard stereo mode. Although this amount of power is sufficient for nearly any DJ regardless of the performance venue, a DJ preparing to play an outdoor set may wish to look at the 5500 watt (2750 watts per channel) PT-4001X as a possible alternative for the utmost in power.

Featuring the input and output connections that most DJs will already be comfortable with, the PT2001X allows input equipment to be connected via balanced (XLR) inputs, or standard unbalanced RCA jacks. For older equipment, such as some turntables, that may produce hum when connected to an amplifier, a grounding screw is provided. Speaker outputs are handled via standard banana plugs, found on most of the world's speakers. The PT2001X features an extra tall rackmount design at just over 5 inches in height, allowing extra room on the inside of the unit for the aluminum heat sink and variable speed cooling fan. If improper installation or a blocked exhaust port ever causes too much heat to build up on the inside of the unit, it will automatically shut down, alerting the user via a front mounted LED of the problem that needs to be corrected.

The PT2001X is well equipped in the electrical department as well, featuring a switching power supply that can be used with most of the world's power outlets, given the proper adapter. Adding to the unit's impressive array of protection features, it has the ability to automatically shut down in the event of a power surge or brownout, preventing any damage that might otherwise occur to the equipment. If any workmanship defects should be found, or if equipment failure occurs, the PT2001X is protected by a factory warranty for the first 30 days after purchase.

Through the years, Pyle Audio has managed to secure an impressive reputation for itself as one of the world's best respected providers of car and marine audio equipment. Recently, however, Pyle has begun to expand into other markets. The secret can not be contained any longer: for nearly any conceivable application, Pyle provides professional-level amplification equipment at some of the highest watt per dollar ratios ever seen.

Pyle PT2001X Power Amplifiers - Summary:
* Rated for a maximum output of 3300 watts to a single bridged speaker, or 1650 watts per stereo channel
* Standard RCA and XLR inputs, and banana plug outputs, ensure that most DJs will be able to utilize the equipment that they already have, without requiring an upgrade
* Tall design and internal heat sink and cooling fan ensure proper temperatures are maintained

Pyle PT2001X Replacement Model

Pyle PT2001X Buying Options

Pyle 1601X Power Amplifiers are a midrange product designed with the professional DJ in mind. It includes the features that a DJ would expect in a top quality amplifier, at a fraction of the price. The 1601X is a dual channel power amplifier, producing a maximum of 2200 watts to a single bridged speaker, or up to 1100 watts per channel in the standard stereo mode. This level of power is more than sufficient for nearly any club or concert hall, although DJs that regularly perform outdoor sets may wish to consider the 3300 watt PT-2001X or 5500 watt PT-4001X as possible alternatives.

The 1601X is equipped with all of the standard connections necessary for use with the most popular DJ equipment, such as both RCA and XLR inputs for your turntable or mixing board. Additionally, it features a grounding screw, useful with some older equipment that may produce excessive hum. Speaker connections are standard banana plugs, used by the majority of the world's speakers.

Along with an impressive array of functionality, the 1601X features the protective circuitry necessary to ensure that your investment is protected even under conditions that are less than optimal. Front mounted LEDs constantly notify the user of the signal levels that are being produced. These LEDs include a clipping indicator, which will flash occasionally under normal usage. If the volume level is high enough to cause possible speaker damage, however, the LED will remain solidly on, notifying you that the volume must be turned down. Additionally, the 1601X features a status light to notify you if the unit is in danger of overheating due to a blocked exhaust vent or improper installation. Under normal conditions, the 1601X's aluminum heat sink and variable speed internal cooling fan are more than able to keep the unit operating within the correct temperature range. The unit is also protected against electrical faults, and will automatically disengage the amplifier channels to prevent damage in the event of a power surge or brownout.

After focusing exclusively on the car and marine audio markets for many years, Pyle Audio has built a strong reputation for itself among enthusiasts as one of the most reliable names on the market in terms of raw wattage per dollar spent. This philosophy has remained with Pyle as they have expanded into other markets, and today Pyle manufactures equipment for the DJ and professional audio markets with that same combination of power and price.

Pyle 1601X Power Amplifiers - Summary:
* Produces a maximum of 2200 watts (1100 watts per channel in stereo mode)
* RCA and XLR inputs, and banana plug speaker connections allow DJs to use the hookups that they are most comfortable with
* Grounding screw prevents hum from being produced by older equipment
* Internal heat sink and cooling fan ensure thermal efficiency
* Protected against defects by a 30 day factory warranty

Pyle 1601X Replacement Model

Pyle 1601X Buying Options

Pyle PT1201X Power Amplifiers are designed especially for use by DJs, although others may find that the myriad of features provided will be of use to them, as well. The PT1201X is a two channel power amplifier, capable of producing a maximum of 1400 watts when driving a single bridged amplification channel, or up to 700 watts per channel in standard stereo operation.

For DJs, the amplifier features a standard unbalanced (RCA) set of inputs long with balanced (XLR) ones. The extra set of inputs allow the PT1201X to be used with the equipment that you have now, and it can still be your amplifier of choice after you upgrade.

To spare the ears of your audience, the PT1201X features turn-on delay, a feature not often found in power amplifiers within this price range. With turn-on delay, the speakers connected to the PT1201X will be momentarily muted when the unit is turned on. This eliminates the pops and thumps that are common with other amplifiers when the owner forgets to reduce the volume when turning the amp on. Additionally, the PT1201X is equipped with a full array of protective circuitry, enabling the unit to shut down before damage can occur in the event of a power surge, spike, or brownout. The unit is protected by a single variable speed internal cooling fan, and able to shut down automatically if overheating occurs due to a blocked vent or improper installation.

The PT1201X is the thinnest amplifier from the PT1201X-4001X series, at just under 3.5 inches, and it is extremely easy to store and transport at just 18.7 pounds. Although the power level should be sufficient for a wide variety of performance situations, DJs who regularly entertain at outdoor events may wish to consider the 3300 watt PT-2001X or 5500 watt PT-4001X as possible alternatives. Both amplifiers offer the same features that DJs will love, with similarly affordable prices.

Over its many years of operation, Pyle Audio has, until recently, been exclusively a provider of high end audio equipment for car and marine use. Secure in its market position of providing perhaps the highest watt per dollar ratio available, Pyle has set out to conquer the word of pro audio with its series of power amplifiers for bands, DJs, studios, and home theaters.

Pyle PT1201X Power Amplifiers - Summary:
* Produces a maximum of 1400 watts to a single bridged speaker, or 700 watts per channel when operating in stereo
* Utilizes industry-standard connections that DJs will be comfortable with: banana plugs for speakers, and RCA or XLR jacks for inputs
* Delayed muting prevents pops and thumps from occurring when the unit is turned on
* System automatically shuts down to prevent damage if a cooling system failure results in overheating
* Protected from electrical fault conditions
* Guaranteed by Pyle to be free of defects for 30 days after purchase

Pyle PT1201X Replacement Model

Pyle PT1201X Buying Options