Pyle PQ3000 Power Amps Review

Pyle PQ3000 Power Amp In only a short time since entering the field of professional audio, Pyle Audio has earned much acclaim for the equipment that it has provided to bands, DJs, and front of house sound engineers. The secret is out: power amplifiers produced by Pyle offer one of the highest watt per dollar ratios to be found anywhere in live and installed sound applications. Pyle PQ3000 Power Amplifiers are a midrange to high end product offering, providing a maximum bridged output of 2200 watts to power you through your next gig or DJ set.

In addition to the 2200 watts offered in bridged mono mode, the PQ3000 delivers a maximum of 1000 watts per stereo channel when put into standard dual channel operation. This level of power is sufficient to drive a subwoofer, or to send a whole band's sound careening to the back rows of almost any medium to large concert venue. For extremely large or outdoor venues, performers may wish to consider operating multiple PQ3000 amplifiers in tandem, or think about the 5500 watt PT4001X as an alternative.

The PQ3000 features 8 signal level LEDs for each amplifier channel, along with a clipping LED to notify you if your input gain level needs to be decreased in order to prevent damage. In addition to the speaker protection offered by the PQ3000, you can also power your way through your concert sets without fear that the unit will fail due to overheating, thanks to the pair of variable speed internal cooling fans, which automatically ramp up in power when more cool air needs to be drawn through the amplifier. The utmost in thermal efficiency would be useless if the PQ3000 failed due to a power surge, however, which is why the unit is also equipped with internal protective circuitry against a wide variety of electrical fault conditiions. If the electrical tolerance of the amplifier is exceeded for any reason, the PQ3000 will automatically shut down to prevent damage to the internal components. It is also proteced by a 30 day warranty. During the first 30 days after purchased, it is guaranteed by Pyle not to suffer from equipment failure or any defects in workmanship. Both of these are extremely unlikely, however, given Pyle's stellar track record for quality, and the solid, all steel rackmount construction of the PQ3000.

Pyle PQ3000 Power Amplifiers - Summary:
* Rated for a maximum output of 2200 watts when bridged and put into mono operation, or 1000 watts per channel in stereo mode
* Internal fault protection circuitry ensures that the unit will shut off before it can be damaged by a power spike
* Front mounted status LEDs notify the user of volume levels, as well as speaker clipping
* Rugged steel construction is able to withstand the harsh conditions of the road
* Protected against defects or failure by Pyle's 30 day factory warranty

Pyle PQ3000 Replacement Model

Pyle PQ3000 Buying Options



Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Pyle pexa Power amplifier" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Pyle PQ2000 Power Amps Review

Pyle PQ2000 Power Amp The PQ2000 is a dual channel stereo power amplifier, rated for a maximim output of 1800 watts when operated in mono bridged mode. Splitting the amplifier into its standard two channels, the power maximum becomes 800 watts per channel with a 4 ohm speaker load. This level of power is perfect for a wide variety of applications. In addition to being suitable for an instrumentalist or DJ, the amplifier also provides enough power to drive a subwoofer, or to be used in installed sound applications such as at a place of worship. very large or outdoor venues, however, may wish to consider the more powerful PQ3000, capable of producing up to 2200 watts in bridged mono mode.

With perhaps the highest watt per dollar ratio in the power amplifier arena, buyers might be surprised to learn upon unpacking the PQ3000 just how solid it feels in the hands. Its all steel rackmount construction is designed to withstand the harshest touring environments, and its dual variable speed cooling fans help to ensure that the unit remains within the proper operating temperatures at all times.

When making an investment in professional audio equipment, it is imperative that you know you equipment will last as long as you need it to. Pyle PQ2000 Power Amplifiers are each backed by a 30 day warranty against malfunctions or any defects of workmanship. Additionally, the unit features a level of fault protection that would be expected in far more expensive equipment. Front mounted LEDs notify the user of the decibel levels that they are producing at all times. If there is enough volume for the speakers to be in danger of clipping, a warning light will notify you that the volume level needs to be reduced to avoid causing damage to your speakers.

Even with proper installation, it is impossible to account for the electrical conditions of the venues in which you perform. The PQ2000 is protected against a wide array of electrical faults, and will shut down automatically if there is danger to the internal circuitry. Additionally, the PQ2000's switching power supply ensures that the amplifier will be ready to perform when you are, no matter where your travels might take you.

Since the founding of Pyle Audio, the company has grown to be hugely successful among its many fans as a top ranked provider of car and marine audio. Recently, Pyle has branched out into new arenas, including that of professional audio. Pyle PQ2000 Power Amplifiers are a midrange offering, designed to provide the power necessary to fill any small to medium sized meeting hall or concert venue with sound, at a price previously considered impossible.

Pyle PQ2000 Power Amplifiers - Summary:
* Up to 1800 watts of power in bridged mode
* Highest watt per dollar ratio in the industry
* Protective circuitry keeps the amplifier from being damaged due to fault conditions

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Pyle PQ2000" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Pyle PQ1000 Power Amps Review

Pyle PQ1000 Power Amp Pyle PQ1000 Power Amplifiers are a midrange offering for bands, DJs, or installed sound applications, providing up to 800 watts when bridged and put into mono operation. This level of power is appropriate for performances at most small or medium concert venues. Additionally, the PQ1000 is a perfect solution for anyone seeking to provide in-house audio for a night club, church, meeting hall, or other place where sound reinforcement is needed.

The PQ1000 features a switching power supply, allowing it to function virtually anywhere your travels might take you. It is cooled by two variable speed fans, and thanks to its all steel rackmount construction, feels extremely solid. In addition to its generous 800 watts of bridged power, the amplifier can be placed into its standard dual channel mode and provide up to 400 watts per stereo channel using 4 ohm speakers. The PQ1000 provides the level of sound quality that fans of Pyle's car audio systems around the world have come to expect: clean and accurate, with thundering bass and sparkling highs.

Electrical issues and distortion can be the bane of a power amplifier owner's existence, due to the speaker and circuit damage that they can cause. Thankfully, the PQ1000 is well protected against both of these. In the event of an electrical fault, the system will quickly disable the amplifier channels to prevent any permanent internal damage. To prevent distortion and possible speaker damage, a set of front-mounted LEDs notify the user of current volume levels, and clipping. If the clipping LED is lit or flashing, you will know that you have set your input levels too high and must reduce them to avoid blowing a speaker.

Along with these other features, any discussion of Pyle PQ1000 Power Amplifiers would be incomplete without a mention of the price. The PQ1000 can make it possible for the most difficult project to come in under budget, as it is priced at a watt to dollar ratio that is simply unheard of elsewhere in the industry. With 800 watts at such a low price, anyone would do well to purchase a PQ1000 for their next concert or DJ set. Pyle, once known only as a manufacturer of audio products for cars and boats, has taken the world of professional audio by storm with its power amplifier offerings.

Pyle PQ1000 Power Amplifiers - Summary:
* Rated for a maximum output of 800 watts when bridged and put into mono operation, or up to 400 watts per channel in stereo mode
* Two variable speed fans ensure thermal efficiency and acceptable temperatures even under hot stage lights
* Protected from power overload, will shut down automatically if a power fault occurs
* Front mounted LEDs notify the user if the speakers are in danger of clipping
* Superlative power at a cost that is far lower than competing power amplifiers with similar features

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Pyle PQ1000" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Pyle PZR3000 Power Amps Review

Pyle PZR3000 Power Amp Pyle PZR3000 Power Amplifiers are intended for public address system use, and can be used for anything from paging systems in offices to amplifying music or speech. Their rugged 31 pound steel rackmount design ensures that their durability will be unmatched within the industry, along with their raw power at a surprisingly low price.

The PZR3000 is a dual channel power amplifier, capable of producing a maximum of 3000 watts when connected to a single bridged speaker, or 1500 watts per speaker in standard dual channel operation. This amount of power is more than sufficient to provide the amplification necessary for any indoor venue, such as an office, place of worship, or meeting hall. Although it is not specifically geared for music amplification, its 10 Hz to 50 kHz frequency response is more than adequate for most music applications. The unit has outputs for either 1/4" or banana plug speaker connections, and inputs are handled via XLR/combo and RCA jacks. These inputs and outputs help to ensure that the PZR3000 will be compatible with nearly all of the equipment that you may already have. Additionally, a grounding screw is provided to help minimize hum with some older hardware.

A wide variety of protective measures are included with the PZR3000, to help ensure that your investment will be safe for many years. The unit is cooled by a variable speed fan system, which quickly forces hot air out of the unit keeping it within acceptable temperature ranges. However, if a blocked vent or improper installation causes the unit to become too hot internally, an LED on the front will light up, and the unit will automatically shut down to prevent permanent damage. The PZR3000 is also capable of shutting down in the event of a power spike, brownout, or other electrical fault conditions. Both amplification channels additionally feature clipping LEDs. Under normal operation, these LEDs will flash from time. However, if they are lit solidly, they serve to notify the user that the amp's volume level needs to be reduced in order to avoid speaker damage.

Until recently, Pyle Audio was best known primarily as a provider of amplification equipment for auto and marine use. However, they slowly begun to expand into the world of professional audio and now provide amplifiers for a variety of applications including live music and front of house installed sound systems.

Pyle PZR3000 Power Amplifiers - Summary:
• Maximum output capacity of 3000 watts in bridged mono mode, or 1500 watts per speaker in dual channel operation
• Designed for public address operation; XLR and RCA inputs, and 1/4" and banana plug outputs ensure maximum equipment compatibility
• Grounding screw minimizes hum when used with older equipment
• Forced air induction cooling system ensures thermal efficiency is maintained
• Protective circuitry automatically shuts the amplifier down to prevent damage due to overheating or electrical fault conditions

Crown CDI 4000 Power Amps Review

Crown CDI 4000 Power Amp The Crown CDi 4000 is the flagship amplifier of the CDi line, which is identical from model to model except in terms of wattage. It is a stereo, dual channel amplifier, capable of producing a maximum of 3200 watts when bridged and put into monaural operation, or 1600 watts per channel when operating in stereo mode and driving a pair of 2 ohm speakers. This is more than enough power to satisfy the requirements of nearly any club, church, or studio. Additionally, the CDi 4000 is capable of operating under power of 70 or 140 volts.

In the most demanding audio applications, you may find it necessary to make customizations to your sound, and the CDi 4000 is equipped with 20 user-selectable presets allowing you to dial in the tone of your choice. Additionally, if you connect the CDi 4000 to your computer using compatible HiQnet software, you can drill down into the details of these presets and manually customize the levels of equalization, limiting, crossover, and delay to your liking. Additionally, HiQnet functionality allows the CDi 4000 to interface with the other devices in your studio, or you can simply disable it and turn DSP off entirely, if you wish.

In addition to its world class tonal quality and power, the CDi 4000 is equipped with extensive fault protection circuitry. The CDi series was the first series of amplifiers by Crown to be modeled on computers using Crown's proprietary Icepak technology, enabling engineers to examine the thermal characteristics of the CDi series before they began being produced. This has resulted in one of the lightest (at 19 pounds), most thermally efficient power amplifier lines ever to be created. The CDi 4000 is cooled using a forced air induction system, which automatically shuts the amplifier off and alerts the user if overheating ever occurs due to a blocked vent or improper installation. The CDi 4000 is completely protected even in the event of user error, thanks to Crown's three year, no fault warranty.

Crown International provides some of the most sought after audio amplification in the world, and has been doing it since 1947. Crown powers the live sound of some of the world's most popular touring bands, and is so desired that many groups specifically state on their performance contracts that the venues in which they perform must provide Crown amplifiers. Crown CDi 4000 Power Amplifiers take this legendary sound and bring it to the world of installed sound applications, including studio monitoring systems, places of worship, public address systems, and meeting halls.

Crown CDi 4000 Power Amplifiers - Summary:
* Rated for a maximum output of 3200 watts in mono bridged operation, or 1600 watts per channel in stereo mode
* Up to 20 user-selectable DSP presets for every aspect of the amplifier's tone
* Numerous fault protection measures keep the amplifier safe from overheating and electrical issues

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Crown CDI 4000" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)