Crown XTI 2000 Power Amps Review

Crown XTI 2000 Power Amp The Crown XTi 2000 Power Amplifier is capable of a maximum 2000 watts of output, when operating in bridged mono mode and driving a 4 ohm speaker load. When placed into standard stereo mode, 2 ohm speakers can be driven at a maximum of 1000 watts. For some applications, the XTi 2000 provides sufficient power to place a subwoofer on one channel, and a main speaker on the other. It is an ideal choice for almost any small to medium concert venue. Bands who are still playing in smaller clubs, however, may be better served by the slightly lower power XTi 1000, while outdoor or permanent installations might demand the higher power output of the XTi 4000 or XTi 6000.

Digital modeling is certainly the way of the future in amplification. Crown has banked on this by providing a wide range of digital customization features in the XTi 2000, including presets for equalization, volume limiting, and delay. It also includes a special filter designed especially for use with subwoofers. In all, the XTi includes 15 selectable presets, which can all be modified by the user. Also, if you wish, digital modeling can be disabled completely.

Even the most durable electronic equipment can be stymied by user error or environmental factors, so the XTi 2000 comes equipped with some of the most resilient fault protection in the industry. In the event of improperly connected equipment that could cause an overload or speaker clipping, such as DJ equipment with onboard pre-amplification, the XTi 2000 will automatically shut down and notify the user of a problem through the front mounted LEDs and backlit liquid crystal display. The amplifier is also able to protect itself from overheating (which only happens in the event of improper installation, thanks to its forced air induction cooling), and electrical fault or overload. Additionally, Crown XTi 2000 Power Amplifiers are backed by Crown's three year, no fault warranty. During this time, the amplifier will be repaired or replaced in the event of any type of damage, including that which was caused by user error.

Since the 1940s, Crown International has set the standard for high quality amplification in some of the most demanding concert settings. From clubs, to concert halls, to all day outdoor events, many of the world's top bands are powered by Crown. Crown XTi 2000 Power Amplifiers are a new entry into the world of amplification, providing superior muscle and clear tone at an unbeatable price point, along with some new sound enhancements not found in competing products.

Crown XTi 2000 Power Amplifiers - Summary:
* Provides up to 2000 watts of power in bridged mono operation, or 1000 watts per channel in stereo dual channel mode
* A wide variety of tonal enhancements which can be customized to the user's liking or disabled completely
* Protective mechanisms prevent damage due to heat or electrical faults

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Crown XTI 2000" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Crown XTI 1000 Power Amps Review

Crown XTI 1000 Power Amp The XTi 1000 is the entry level model in the XTi series of power amplifiers, capable of producing a maximum of 1400 watts in bridged monaural operation, or 700 watts when driving 2 ohm speakers in stereo mode. This level of power is more than sufficient for most clubs and small to medium sized concert halls. Additionally, the XTi 1000 includes a variety of digital modeling features enabling you to dial in the perfect tone for your chosen application. It features several presets that are useful for subwoofers, instrumentalists, DJs, or for pure speech, and every setting can be manually adjusted by the user for total customization.

Crown has long led the amplification industry in fault protection measures, and the XTi 1000 is no exception. It features protective circuitry enabling the amplifier to automatically shut down before damage can be done in the event of overheating, shorted or open circuits, mismatched loads, electrical overload, or general user error. It is cooled by forced air induction, and at a weight of just 18.5 pounds, is extremely easy to mount in a rack, then remove for storage and transportation to your next performance location. The front display of the XTi 1000 is liquid crystal with backlighting, enabling the amplifier to easily communicate fault conditions to the user so that they can be quickly rectified. The unit also has LED which light up in the event of volume levels that are high enough to cause clipping and speaker damage.

For bands that intend to play at outdoor concert venues, the XTi 1000 may not provide quite enough power. For this type of performance situation, it would be advisable to look into a higher powered amplifier such as the XTi 6000, which produces a maximum of 6000 watts in bridged mono operation.

For over 60 years, Crown International has provided the amplifiers that are most sought after by the world's top performing musicians. Crown amplifiers are famous worldwide for their build quality, tone, and three year no fault warranty in which damaged amplifiers are repaired or replaced, even if the owner is to blame for the damage. Crown XTi 1000 Power Amplifiers represent a new revolution in amplification technology, providing the famous Crown power at a new, lower price, along with some new features that are sure to keep Crown at the top of the power amplification field for many years to come.

Crown XTi 1000 Power Amplifiers - Summary:
* Rated for a maximum power output of 1400 watts in bridged mono operation
* Digital modeling circuitry enables the tone of the amplifier to be fully customized for a variety of different settings
* Extensive fault protection enables the amplifier to automatically shut down before damage can be done by overheating or electrical problems
* Precision-detented controls allow for easy recall of previous settings when the amplifier is moved to a new location

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Crown XTI 1000" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Crown XLS 5000 Power Amps Review

Crown XLS 5000 Power Amp The Crown XLS 5000 is the flagship of the low cost XLS power amplifier line, rated for a maximum output of 5000 watts when operating in bridged mono mode and driving a 4 ohm speaker load. The XLS 5000 is a two channel amplifier, and can also be used in stereo mode. When driving a pair of 8 ohm speakers, it can output a maximum of 1100 watts per channel. This level of power is sufficient to provide the sound for all-day outdoor events without breaking a sweat. Because of its massive weight (over 60 pounds), it is best suited for bands that have plenty of assistance with moving their equipment, or for permanent installations from which they will not be moved. Bands that will be performing in small and medium concert venues may find that the XLS 5000 provides more power than is necessary, and may be better off looking at the lower power offerings in the XLS lineup such as the XLS 802 or XLS 602.

The XLS 5000 features precision detented controls, allowing you to easily recall your settings if the amplifier ever needs to be removed. When installed in the proper rackmount configuration, its forced air induction cooling system will be more than sufficient to keep the amplifier operating within the proper temperature ranges at all times, even through all day events under the hot sun. The XLS 5000 also has numerous protective features, in case the level of heat ever becomes too much for the amplifier to handle (for example, if enough air space is not given for the unit to properly cool itself).

Anyone who has ever been faced with the responsibility of purchasing the equipment for a large outdoor show knows how difficult it can be to come in under budget. In fact, sound engineers frequently joke about the "rule of threes": expect any project to cost at least three times what you originally plan for. This has unfortunately been especially true when Crown amplifiers are a part of the plan, as their price has become as well known as their legendary tone and power. Crown XLS 5000 Power Amplifiers were created with the goal of changing this problem, by providing that same level of quality along with a number of features generally only found in more expensive equipment, at a price point far below what would be expected for this level of power.

Crown XLS 5000 Power Amplifiers are backed by a three year, fully transferrable warranty. When mounted properly and given sufficient space for cooling, you can be confident that it will power your band or concert venue without a problem for many years.

Crown XLS 5000 Power Amplifiers - Summary:
* Rated for a maximum output of 5000 watts when driving a 4 ohm speaker load in bridged mono operation
* Crown power and sound at an unbelievable price point

Crown XLS 602 Power Amps Review

Crown XLS 602 Power Amp The XLS 602 Power Amplifier is rated for a maximum output of 1200 watts (mono, bridged). In stereo mode, with 4 ohm speakers, it can produce a maximum of 450 watts, and with 8 ohm speakers, the maximum is 300 watts. This level of power gives the XLS 602 the muscle necessary to power instrumentalists, vocalists, and DJs who perform at medium sized concert venues. Although this might be more wattage than is necessary for smaller venues, it is important to keep in mind that power amplifiers are more efficient when driving easier loads. Buying an amplifier with more power than you currently need means that you can play at lower relative volumes, which will result in a cooler-running amplifier. An amplifier that runs at cooler temperatures lasts longer.

Power amplifiers in the XLS series each come with a three year, fully transferrable warranty. To give the XLS 602 the kind of reliability necessary for a warranty of this kind, Crown engineered it to have excellent thermal characteristics. Cooled by forced air induction, the XLS 602 is designed to remain cool under the harshest stage lights. As long as it is installed in the proper rackmount configuration, no heat problems should ever be experienced. If the amplifier is ever installed improperly, or not given enough space for hot air to be effectively removed by the fans, the XLS 602 will detect the impending heat damage, shutting down automatically. If this happens, an LED on the front of the unit will light up, alerting the user to the problem.

Crown XLS 602 Power Amplifiers are an excellent choice for musicians who play in medium sized performance venues, such as clubs, and concert halls. For bands that will be playing at very large locations, or that expect to put on many outdoor shows, a more powerful amplifier such as the XLS 802 would be recommended as an alternative.

Since the 1940s, Crown International has been providing some of the world's most sought-after amplification equipment to discerning musicians of all kinds. Although less established musicians and DJs have long wished that they could afford Crown equipment, they have often been forced to settle for lesser quality due to the high cost that often goes hand in hand with purchasing the best. Crown XLS 602 Power Amplifiers have changed this, by introducing Crown power and quality in an amplifier at a price point that Crown products have never been available at in the past.

Crown XLS 602 Power Amplifiers - Summary:
* Able to output at a maximum of 1200 watts in mono bridged operation, or up to 450 watts when driving a pair of 4 ohm stereo speakers
* Legendary Crown power and sound quality at an unbeatable low price point
* Excellent thermal characteristics and solid construction ensure many years of reliable operation
* Backed by Crown's three year, fully transferrable warranty

Crown XLS 602 Replacement Model

Crown XLS 602 Other Buying Options



Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Crown XLS 602 Power amplifier" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)
Crown Xls1502 2-Channel 525W Power Amplifier With Onboard Dsp

Crown Xls1502 2-Channel 525W Power Amplifier With Onboard Dsp

The XLS Series has been a popular sound reinforcement solution since its introduction. It is aimed at the working musician who needs reliability, affordability and quality in a power amplifier. The XLS1502 is part of the latest generation of XLS amplifiers, and it offers unprecedented control, efficiency and usability. It features a sleek new look, an LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS1502 is ultra-efficient with Crowns patented DriveCore technology and can drive 1550W at 4 bridged with plenty of headroom, guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb. Higher DSP capabilities: More control; has band pass filter per channelIncreased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venuesSelectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full powerSet sleep mode after specified time without having to press a buttonSecurity setting disables menu buttons; menu locked/unlocked by entering combinationSystem reset allows factory settings to be restoredRemote power trigger. Peakx Limiters provide maximum output while protecting your speakersXLR, 1/4", RCA inputs provide flexibilityIntegrated PureBand Crossover System for better performance and controlEfficient forced-air fans prevent excessive thermal buildup





Crown XLS 402 Power Amps Review

Crown XLS 402 Power Amp The Crown XLS 402 is a power amplifier that is capable of outputting at a maximum of 900 watts when operating in mono bridged mode, 450 watts in stereo operation with 4 ohm speakers, and 300 watts in stereo with 8 ohm speakers. This amount of power is ideal for bands, DJs, or vocalists who perform in small to medium venues such as clubs, and some concert halls and auditoriums. For outdoor performances, or larger concert venues, a larger amplifier such as the Crown XLS 602 or 802 would be preferable. In smaller settings, however, you can be sure that the XLS 402 will produce enough volume to send your tone all the way to the back row.

Along with sound quality, reliability has always been among Crown's trademarks. The XLS 402 is no exception, featuring an all steel rackmount construction, numerous protective mechanisms, and a fully transferrable three year warranty. The XLS series of amplifiers were modeled virtually on computers before being built, allowing the engineers at Crown to see the thermal characteristics of the amplifiers before they were sent to the factory. In this way, Crown was able to waste less time and material in getting the XLS series into stores, resulting in further cost savings for the consumer. The XLS 402 is cooled by forced air, and is equipped with the ability to shut down automatically if the operating conditions ever become so hot as to be unsafe for the amplifier.

Crown XLS 402 Power Amplifiers are an excellent choice for bands or DJs who are ready to step up from the smallest clubs and begin playing in small to medium sized venues. The XLS 402 has the power necessary to make sure that any instrumentalist is clearly heard in a venue of this size. Bands who will be playing in large or outdoor venues, however, might consider something a bit more powerful such as the Crown XLS 602 or 802.

Look at many of the nation's concert stages, and you will see bands that are powered by Crown amplifiers. Among the top names in the industry since its founding in 1947, Crown amplifiers have long been prized by the world's best musicians. Unfortunately, the price has typically been out of reach for many less established musicians, who have been forced to opt for less expensive equipment. Crown XLS 402 Power Amplifiers have changed this problem, by putting Crown power and reliability into a package that is priced at a lower point than ever before.

Crown XLS 402 Power Amplifiers - Summary:
* Rated for a maximum power output of 900 watts in mono bridged operation
* Famous Crown sound quality at a lower price point than ever before
* Excellent thermal characteristics: forced air cooling allows the unit to remain within the proper operating temperatures at all times
* Ideal for small to medium performance venues

Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Crown XLS 402" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)