Tag Archives: power amps

The Right Way to Bridge a Power Amplifier

Posted on by

Many power amplifiers rate their maximum power output in watts, when operating in bridged mode. When an amplifier is bridged, its two output channels are combined into one. Rather than driving two speakers, the amplifier then drives only one speaker. The benefit of bridging a power amplifier is that in bridged mode, an amplifier's maximum power output is almost always more than twice its maximum output in two channel operation. bridged mode can, in fact, bring a three- or four-fold increase in power. Four channel power amplifiers can also be bridged; when bridged, four output channels will become two.

When bridging a power amplifier, it is important to first reference the amplifier's instruction manual and confirm that it supports bridged operation. Although most power amplifiers do support bridged operation, attempting to bridge an amplifier that does not support it can permanently damage it. Also, the power amplifier's instruction manual will almost always have a diagram explaining how it should be bridged. Always be very sure of what you are doing before attempting to bridge a power amplifier, and if you are not sure, call the amplifier's manufacturer to confirm. Bridging a power amplifier can be physically hazardous, as many power amplifiers are able to produce currents that are potentially lethal.

It is vital to bear in mind that the primary purpose of bridging a power amplifier is not simply to make the sound louder, although that certainly can be a result. The purpose is to drive speakers that the amplifier would not ordinarily be able to properly drive. For example, some public address speaker enclosures containing several small speakers might ordinarily not be able to be driven by a power amplifier running in two channel mode, but may work in bridged mode.

Examining the rear side of a power amplifier, at least two sets of speaker terminals should be seen, each having one positive post and one negative post. To bridge the power amplifier, the two leads coming from the speaker should be connected to the positive post on one amplifier channel, and the negative post on the other channel. In the case of Peavey power amplifiers, this process is made simpler by the presence of red speaker terminals. To bridge the amplifier, simply connect the speaker to the two red terminals. Additionally, a switch on the back of the unit will need to be flipped in order to enable bridged operation.

Bridging a Power Amplifier:
1. Confirm that the power amplifier in use is capable of bridged operation.
2. Be absolutely sure of the method for bridging the power amplifier that is in use before beginning.
3. Use extreme care, as an amplifier in bridged mode is producing potentially hazardous currents.
4. Before bridging an amplifier to correct a volume issue, confirm that a different amplifier or speakers would not in fact be a better solution.
5. Bridge the amplifier by connecting the speaker to the positive speaker terminal on one channel, and the negative terminal on the other.

« Back to Power Amp Guides Index

Peavey PV900 Power Amps Review

Posted on by

Peavey PV900 Power Amp Peavey PV900 Power Amplifiers are ideal for professional rehearsal situations, or performances at small venues. Additionally, combined with a mixing board, the PV900 can be an ideal front of house amplifier for an auditorium with good acoustics, where clean sound is necessary but high volume is not. For bands that perform at large, outdoor, or very noisy venues, Peavey produces several amplifiers that are able to produce much higher volumes, such as the CS3000 or CS4000, which still maintain Peavey's typically affordable price points.

The PV900 is capable of providing up to 600 watts of power in bridged mono mode. In this mode, the two channels of the amplifier are combined, making a single powerful mono amp. However, the PV900 can also handle stereo input, or two channels of mono input. This flexibility makes the PV900 an ideal choice for vocalists, instrumentalists, or as a DJ or house amplifier. In stereo mode the PV900 produces up to 300 watts per channel using 4 ohm speakers. It is built extremely solidly and used by many touring bands. Many professional musicians have reported relying on the same Peavey power amplifier for over 20 years, and upon seeing this very heavy rackmount unit, it is easy to see why.

Although the PV900 is high on sound and low on price, it includes many of the same protective features found in Peavey's more expensive equipment. Musicians who are new to the concept of a discrete power amplifier will be especially happy to have DDT. With it, the PV900 detects when a clipped signal is being sent to the amplifier, indicating that the input is too loud and that damage could be caused. DDT automatically engages, lowering the master volume to prevent damage from being caused to the speakers. The PV900 also has an internal cooling system, which is able to prevent the unit from overheating even in the harshest of environments.

Peavey has been providing the power amplification used by the world's foremost performing and touring musicians since 1965, and Peavey PV900 Power Amplifiers build upon the company's strong reputation for producing great sound at prices that ordinary people can afford. The PV900 includes features that are found in some of Peavey's much more expensive amplifiers, including bridged operation, Distortion Detection Technique (DDT), and variable speed internal cooling fans. It can project a clear, accurate, uncolored sound suitable for rehearsal spaces and live performances at small to medium sized venues.

Peavey PV900 Power Amplifiers - Summary:
* Rated for up to 600 watts of output power in bridged mono mode, or 300 watts per channel in stereo mode
* Suitable choice for rehearsals, small performance venues, and front of house amplification for clubs and auditoriums
* Can be used by instrumentalists, vocalists or DJs
* Includes the same DDT speaker protection functionality found in Peavey's more expensive amplifiers
* Entry level power amplifier; able to withstand harsh road conditions, but does not produce the kind of power required in large or outdoor concert situations
Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Peavey pv 900" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

Peavey PV1500 Power Amps Review

Posted on by

Peavey PV1500 Power Amp The name Peavey is synonymous with high quality amplification. Since 1965, Peavey has been an industry leader in great sounding, low cost amplification, and Peavey PV1500 Power Amplifiers continue this longstanding tradition. The PV amplifier product range provides enough amplification power for small concert venues, while including many of the same protective capabilities found in Peavey's more expensive products. The PV1500 is rated for a maximum output power of 1000 watts, when operating in bridged monaural mode. In stereo mode, or when in normal dual channel monaural operation, the PV1500 sends 500 watts per channel to 4 ohm speakers, or 300 watts per channel to 8 ohm speakers.

Because it can be used to amplify either stereo or mono signals, the PV1500 is equally as useful for DJs as it is for instrumentalists and vocalists. Additionally, amplifiers from the PV series are very popular for front of house amplification. The PV1500 provides more than enough power for bars and clubs to use for their in house music when no performing artists are scheduled, or for educational applications such as school auditoriums. For bands, the PV1500 is sufficient to provide the amplification necessary for most small and medium sized concert venues, but may not deliver quite enough power for outdoor shows.

Peavey provides top of the line build quality throughout its entire product range, and the PV1500 is no exception. It is able to withstand the equipment abuse that is common in touring environments, and continue providing spectacular sound on demand. Many musicians have reported using the same Peavey power amplifier, with minimal repair work, for decades. The PV1500 includes Peavey's famous DDT (Distortion Detection Technique), which automatically limits input gain when clipped waveforms are detected. Clipped waveforms signify that the volume being sent to the amplifier is too high, and with no limiting, they can damage the amplifier's internal circuitry or any speakers that are connected. DDT effectively eliminates both of these concerns, and warns the owner with an LED that a volume correction needs to be made. The PV1500 also includes numerous built-in protective measures to keep the unit's internal heat down, and break the electronic circuits in the event of a severe power spike, stopping the flow of electricity before any damage can be done. In normal operation, the unit runs at an extremely low temperature for the amount of power that it produces, and as long as it is properly installed in an equipment rack as specified by Peavey, heat issues should never be a concern.

Peavey PV1500 Power Amplifiers - Summary:
* Produces up to 1000 watts in bridged operation, or 500 watts per channel in two channel operation
* Ruggedly built; able to withstand harsh road conditions
* Power level is sufficient for small and medium concert venues, but may not be ideal for large or outdoor venues
* Popular choice for DJ and front of house amplification
* Includes much of the same internal protective circuitry found in the more expensive Peavey product ranges
Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Peavey pv 1500" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

QSC RMX 5050 Power Amps Review

Posted on by

QSC RMX 5050 Power Amp There are some performance situations where only the most powerful amplifier will do, and QSC RMX 5050 Power Amplifiers fit that bill. QSC has been providing top quality amplification to professional musicians for over four decades, and the RMX 5050 is the new flagship of the RMX power amplifier line, providing up to 5000 watts of muscle. The RMX 5050 can be the backbone of any touring band's sound system, providing enough power to reach the back rows of virtually any indoor or outdoor concert venue.

The RMX 5050 is a two channel power amplifier, capable of the aforementioned 5000 watts in bridged mono mode, or up to 2500 watts per channel when driving a pair of 2 ohm speakers. With 4 and 8 ohm speakers, the maximum output of the RMX 5050 is 1800 watts and 1100 watts, respectively. This power is provided with minimum waste: the RMX 5050 is among the most efficient amplifiers in the RMX product line. It also provides exactly the same sound quality that musicians have come to expect from QSC products, with a tonal response that is designed to be even from the lowest bass to the highest treble frequencies, for maximum accuracy.

In dual channel operation, the RMX 5050 is an ideal solution for driving both a subwoofer and main speakers, thanks to its independent bass roll-off filters. For each channel, the owner can set the roll-off filter at 50 Hz, 30 Hz, or off. This allows for maximum protection of speakers that can not reproduce subsonic bass frequencies, and minimum crosstalk when a standard speaker and subwoofer are used in tandem.

Along with top of the line sound quality, the RMX 5050 features several safety mechanisms to ensure proper operation even in less than ideal conditions. Its automatic clipping detection feature senses when clipped waveforms are entering the amplifier (due to input volume that is too high), and automatically reduces the internal volume of the amp to prevent permanent damage from being done to the speakers. Clipping detection can also be disabled if desired. Additionally, the unit features direct mounted internal heat sinks and high power cooling fans, ensuring that proper operating temperatures are maintained even during all day events.

For musicians that demand the most powerful amplifier and highest quality sound in one package, QSC RMX 5050 Power Amplifiers are the ideal choice. With the RMX 5050, QSC has managed to provide one of the most powerful amplifiers on the market, while maintaining the tonal quality that they are beloved among musicians for - all in an affordable package that won't break the bank.

QSC RMX 5050 Power Amplifiers - Summary:
* Rated for up to 5000 watts in bridged mono operation, or 2500 watts per channel when driving two speakers
* Industry leading fault protection ensures that the unit can withstand strenuous road conditions
* Adjustable bass roll-off filters provide speaker protection and a customized tone
* Three year factory warranty, can be extended to six years after purchase
Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "QSC rmx 5050" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)

QSC RMX 850 Power Amps Review

Posted on by

QSC RMX 850 Power Amp QSC has been among the top players in the sound amplification industry since the 1960s. Their unique combination of innovative technologies, accurate tonal response, and raw power has made them popular with all types of musicians and sound engineers for decades. This tradition has been continued with their QSC RMX 850 Power Amplifiers. The RMX 850 is the entry level amplifier in the RMX series, producing plenty of raw muscle and superlative tone at one of the lowest price points ever.

The RMS 850 is a dual channel power amplifier, capable of supplying up to 830 watts in bridged mono operation or 430 watts per channel in stereo mode, using 2 ohm speakers. It is beloved by musicians, DJs, and home theater aficionados alike as an entry level power amp that refuses to compromise on tonal or build quality. In terms of sound output, the goal of the RMS series is to provide a completely flat response across the entire frequency spectrum, resulting in sound reproduction that is totally accurate. The RMS 850 ably succeeds in this goal, and additionally provides independently selectable low pass filters at 30 Hz or 50 Hz for each channel, protecting speakers that are unable to reproduce subsonic frequencies at high volume levels.

In addition to being able to produce the punchy bass and crisp high end frequencies that professional musicians require, the RMS 850 is built to last. It features durable, heavy construction, quiet internal cooling fans, and the highest quality toroidal transformer to ensure uninterrupted operation for years to come. The RMS 850 does not compromise on internal build quality, either. Each channel has independent fault protection from overloads of either heat or input current, automatically adjusting volume levels or temporarily breaking circuits in order to ensure that the speakers and the amplifier itself are protected in conditions that are less than ideal.

In the entry level pro audio market, it would be difficult to find a better buy than QSC RMS 850 Power Amplifiers. By including unsurpassed build quality and protective circuitry in an inexpensive package, the RMS 850 is an excellent choice for bands that might be new to touring and are still in the club circuit. For bands that regularly play at very large or outdoor venues, it would be better to consider another power amplifier such as the RMX 2450, which has a maximum output capacity of up to 2400 watts.

QSC RMX 850 Power Amplifiers - Summary:
* Maximum rated output power of 830 watts in bridged mono operation, or 430 watts per channel in stereo operation (with 2 ohm loudspeakers)
* Heavy build quality ensures that the amplifier is able to withstand the rigors of storage and road transportation
* Independently controlled low pass filters for each amplification channel; can be set to 30 Hz or 50 Hz or disabled completely
* Automatic clipping protection for speakers; can be enabled or disabled at the user's discretion
* 3 year warranty plus available 3 year service contract extension
Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "QSC rmx 850" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 6. (Could not resolve host: rest.ebay.com)